Adjusting Pedal Drive Lock Clips to Fit Pedal Drive Rest Top Cover on Pedal Pro Fish 2.9m and Modular Kayaks
The hull of the Pedal Pro Fish 2.9m and modular kayak models differs slightly from other pedal kayaks. To ensure that the pedal drive rest top cover fits properly, you'll need to adjust the pedal drive lock clips. Follow these steps:
Loosen the Lock Clip Screws:
- Use a screwdriver to loosen the screws securing the pedal drive lock clips. Do not remove the screws completely; just loosen them enough to allow the lock clips to move.
Lift and Adjust the Plastic Lock Clips:
- Gently lift the plastic lock clips after loosening the screws. Adjust their position to align with the hull’s shape and ensure a better fit for the pedal drive rest top cover.
Reposition the Top Cover:
- With the lock clips in the correct position, place the pedal drive rest top cover back onto the kayak. Make sure it sits properly and aligns well.
Tighten the Lock Clip Screws:
- Carefully tighten the screws of the lock clips to secure them in their adjusted positions. Ensure that the cover fits snugly and is properly aligned.
Check the Fit:
- Press down gently on the pedal drive rest top cover to ensure it is securely in place without any gaps or misalignment.
Repeat Adjustments if Needed:
- If the cover still doesn't fit as expected, repeat the steps, making minor adjustments until the desired fit is achieved.
Tips:
- Avoid overtightening the screws to prevent damage to the plastic parts.
- Refer to the video for a detailed step-by-step guide, especially on how to lift and adjust the lock clips.