Attaching Expedition Rudder wire
To assemble the wire (see picture with red kayak and see attached video's).
And please put the rope here (see picture with blue/white kayak), that will stop the rudder from coming back up.
Related Articles
Expedition and Dreamer spare inserts
On our Expedition and Dreamer series there are a few 'empty' screw inserts. There are no fittings required. One is for a different kind of rudder and one is for a skeg control box, but if there is no skeg, there is no fitting. (See pictures for ...How to attach the carabiner to Air Glide rudder system?
The carabiner needs to be in the right position to fit, so it's sometimes a bit difficult to get it right. Please try it like the attached video.How to adjust the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak
If you require adjustment of the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the centre position and retighten. If the wire has ...How to install rudder on a Breeze and Downwind kayak?
You need to prepare the following materials. 1. Smart Track Flow Kick Up Rudder - Smart Track Kick Up Rudder (including rudder fittings) 2. Rudder rope for Ski Kayak 3. Rudder tube for Ski Kayak Follow the video guides attached.What are black triangle bits and how do I use them? (Air Glide rudder system)
They are not really necessary. They are used to tighten the string (between the footrest and the rudder) so that there is enough tension on the toe piece so that it pulls it forwards. See the attached video showing how to use it.