Expedition and Dreamer spare inserts
On our Expedition and Dreamer series there are a few 'empty' screw inserts.
There are no fittings required.
One is for a different kind of rudder and one is for a skeg control box, but if there is no skeg, there is no fitting.
(See pictures for examples).
Related Articles
Attaching Expedition Rudder wire
To assemble the wire (see picture with red kayak and see attached video's). And please put the rope here (see picture with blue/white kayak), that will stop the rudder from coming back up.
Speedy wear plate screws size
Speedy - wear plate screws size: M4*16.
How to fix air leak on wheels of kayak trolley?
If the wheels on your kayak trolley become flat quickly, please check and rotate the valve clockwise tightly. If this doesn't fix the problem, there might be a slow leak. You can check it by spraying some soapy water and if it starts bubbling ...
How to adjust the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak
If you require adjustment of the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the centre position and retighten. If the wire has ...
Spray skirt too tight to fit kayak cockpit
They are very tight initially, like a wetsuit, because neoprene stretches a lot with use and you don't want water pooling on the deck. So to speed up the loosening, wet the spray skirt and put over the cockpit, and leave for 48 hours. This will help ...