Genesis Basecamp System Igniter Won't Start Fix

If your Genesis Basecamp System fails to ignite, here are some suggested troubleshooting steps for you to try.

First, kindly try adjusting the electrode as instructed in the attached photos.

If this doesn't work, kindly attempt to light the stove with a match. If it lights with a match, it confirms that the gas is working. We might need to bring it back to be inspected further.

• Related Articles

• Kayak Dents Fix

  Regarding the denting of the hull. Being the nature of polyethylene kayaks is that they are a soft plastic and malleable. The good news though is that it can be fixed quite easily. To remove a dent, set the boat in the direct hot sun for a couple of ...

• How to fix air leak on wheels of kayak trolley?

  If the wheels on your kayak trolley become flat quickly, please check and rotate the valve clockwise tightly.  If this doesn't fix the problem, there might be a slow leak. You can check it by spraying some soapy water and if it starts bubbling ...

• How to fix the Hercules Pump if PSI is not increasing?

  1. Plug in the electric pump. 2. Press the "start/stop" & "select unit" buttons at the same time. (see picture below) 3. Release the buttons and unplug the pump when the display shows "0" 3. Plug in and restart the pump. Test to see if it works. ...

• What are black triangle bits and how do I use them? (Air Glide rudder system)

  They are not really necessary. They are used to tighten the string (between the footrest and the rudder) so that there is enough tension on the toe piece so that it pulls it forwards. See the attached video showing how to use it.

• How to fix noise from rudder housing on Pedal Pro 3.9m

  Essentially just adding this gasket ring will stop the noise. Contact support via email at support@baysports.com.au if ever you encountered this noise for the Pedal Pro 3.9m model.