How to fix noise from rudder housing on Pedal Pro 3.9m
Essentially just adding this gasket ring will stop the noise.
Contact support via email at support@baysports.com.au if ever you encountered this noise for the Pedal Pro 3.9m model.
Related Articles
How to adjust the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak?
If you require adjustment of the rudder tension and positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the center position and retighten. If the wire has ...Pedal Fish Pro 3.2m - Pedal Drive System
Watch how our pedal drive system lifts up and out of the water, so you can quickly pull up when in shallow waters. This is the Pedal Fish Pro 3.m fishing kayak by Bay Sports.How to Replace the Rudder System on a Bay Sports Pedal Pro Fish kayak 3.2
How to replace rudder system on Bay Sports Pedal Pro Fish kayak.How to Install A Transducer Fish Finder?
You can install the transducer in that little compartment underneath the kayak. There are 4x screws to secure it there. The transducer arm goes up through the scupper hole and pops out on the top side right behind the pedal drive unit. I have ...2019 Pedal Pro Fish 3.2m Video Walk-Through
2019 Pedal Pro Fish 3.2m Video Walk-Through The Pedal Pro Fish is our 3.2m pedal-powered fishing kayak. Brand new to our 2019 range of kayaks, you can fish all day and let your legs do all the work! + Propel yourself effortlessly through the water, ...