You can install the transducer in that little compartment underneath the kayak. There are 4x screws to secure it there. The transducer arm goes up through the scupper hole and pops out on the top side right behind the pedal drive unit. I have ...
If you require adjustment of the rudder tension and positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the center position and retighten. If the wire has ...
Watch how our pedal drive system lifts up and out of the water, so you can quickly pull up when in shallow waters. This is the Pedal Fish Pro 3.m fishing kayak by Bay Sports.
Rudder Assembly Instructions for 3.6m Pedal Pro Kayak and 2.9m Modular Kayak from Vicking https://workdrive.zohoexternal.com/file/fx2aba8ae1c22a8184c66ae5ea10a2f78f61a
The hull of the Pedal Pro Fish 2.9m and modular kayak models differs slightly from other pedal kayaks. To ensure that the pedal drive rest top cover fits properly, you'll need to adjust the pedal drive lock clips. Follow these steps: Loosen the Lock ...