Set up Perch Angler

Set up Perch Angler

Please have a look at the attached video's from our supplier. 
Also: 
1. Stand the pedal up before installing the rudder. 
2. Be sure to tighten the wire rope and then tighten the rudder screw with the wrench. 
    • Related Articles

    • Attaching Expedition Rudder wire

      To assemble the wire (see picture with red kayak and see attached video's).  And please put the rope here (see picture with blue/white kayak), that will stop the rudder from coming back up. 
    • Attaching carabiner to Air Glide rudder system

      Attaching the carabiner to the Air Glide rudder system: it needs to be in the right position to fit, so it's sometimes a bit difficult to get it right, please try it like the attached video. 
    • How to adjust the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak

      If you require adjustment of the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the centre position and retighten. If the wire has ...
    • Expedition and Dreamer spare inserts

      On our Expedition and Dreamer series there are a few 'empty' screw inserts.  There are no fittings required.  One is for a different kind of rudder and one is for a skeg control box, but if there is no skeg, there is no fitting.  (See pictures for ...