Customer Support Portal - How To
How to install rudder on a Breeze and Downwind kayak?
You need to prepare the following materials. 1. Smart Track Flow Kick Up Rudder - Smart Track Kick Up Rudder (including rudder fittings) 2. Rudder rope for Ski Kayak 3. Rudder tube for Ski Kayak Follow the video guides attached.
How to revise cable on Pedal Pro Fish 3.2 (old Version)
See attached video on how to revise the cable on the Pedal Pro Fish 3.2.
What are black triangle bits and how do I use them? (Air Glide rudder system)
They are not really necessary. They are used to tighten the string (between the footrest and the rudder) so that there is enough tension on the toe piece so that it pulls it forwards. See the attached video showing how to use it.
How to fix air leak on wheels of kayak trolley?
If the wheels on your kayak trolley become flat quickly, please check and rotate the valve clockwise tightly. If this doesn't fix the problem, there might be a slow leak. You can check it by spraying some soapy water and if it starts bubbling ...
Assembly instructions for WHEELS FOR PEDAL PRO FISH 3.2
https://cdn.shopify.com/s/files/1/1778/5045/files/Pedal_3.2m_wheels_install_instruction.pdf?v=1645152332
How to adjust the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak
If you require adjustment of the Rudder Tension and Positioning on the Pedal Pro Fish Tandem, 4.3m Pedal-Powered Fishing Kayak, please undo the two screws, re-adjust and position the rudder into the centre position and retighten. If the wire has ...
How to tighten, repair & replace a valve on an inflatable kayak, SUP and pontoon
How to repair & replace valve on inflatable kayak & SUP and pontoon See Bay Sports video: https://youtu.be/TWPBgHGF7V4 How to Tighten & Loosen a Bay Sports Pontoon Pressure Relief Valve (Safety Valve): See Bay Sports ...
Set up Perch Angler
Please have a look at the attached video's from our supplier. Also: 1. Stand the pedal up before installing the rudder. 2. Be sure to tighten the wire rope and then tighten the rudder screw with the wrench.
Spray skirt too tight to fit kayak cockpit
They are very tight initially, like a wetsuit, because neoprene stretches a lot with use and you don't want water pooling on the deck. So to speed up the loosening, wet the spray skirt and put over the cockpit, and leave for 48 hours. This will help ...
Attaching Expedition Rudder wire
To assemble the wire (see picture with red kayak and see attached video's). And please put the rope here (see picture with blue/white kayak), that will stop the rudder from coming back up.
Replacing straps on Stadium Seat
Yes, it's very easy to replace, just remove the screws connecting with the two ends of the seat
How to attach seat to SUP
1. Start by placing the seat on your paddleboard in the right position. 2. You will see two sets of straps. 3. Two are meant to be attached on the back, two on the front. 4. Attach the back straps to the board. 5. Arrange the seat again and attach ...
How to attach the carabiner to Air Glide rudder system?
The carabiner needs to be in the right position to fit, so it's sometimes a bit difficult to get it right. Please try it like the attached video.
How to use handpump inflatable kayak
https://youtu.be/gOMJZxcidf8
Expedition and Dreamer spare inserts
On our Expedition and Dreamer series there are a few 'empty' screw inserts. There are no fittings required. One is for a different kind of rudder and one is for a skeg control box, but if there is no skeg, there is no fitting. (See pictures for ...
Speedy wear plate screws size
Speedy - wear plate screws size: M4*16.
How to Install a Stadium Seat on the Bay Sports Pedal Pro Fish 3.2 Kayak
How to Install a Stadium Seat on the Bay Sports Pedal Pro Fish 3.2 Kayak https://youtu.be/KF7knGBJo84