To glue EVA foam deck

To glue EVA foam deck

1. Determine exact location of the EVA with issues
2. Make sure location is completely flat with a smooth texture
3. Clean the area where the EVA piece will be placed thoroughly and carefully. Be aware that once the adhesive has bonded to the surface of the EVA piece it cannot be removed.
4. Push firmly in place or put weight on it 5. Let sit 24 hours before use.

Notes:
• Perform all of your repairs in a well-ventilated area
• Avoid inhaling toxic vapors.
• Avoid contact with the adhesive.
• Keep all repair materials (glue, solvents, etc.) away from the reach of children.

    • Related Articles

    • Kayak Dents Fix

      Regarding the denting of the hull. Being the nature of polyethylene kayaks is that they are a soft plastic and malleable. The good news though is that it can be fixed quite easily. To remove a dent, set the boat in the direct hot sun for a couple of ...

    • Spray skirt too tight to fit kayak cockpit

      They are very tight initially, like a wetsuit, because neoprene stretches a lot with use and you don't want water pooling on the deck. So to speed up the loosening, wet the spray skirt and put over the cockpit, and leave for 48 hours. This will help ...